A-90800 incorporates cutting-edge inhibitor technology to provide a reasonably priced long life antifreeze. A-90800 is a hybrid organic acid technology (HOAT) additive/inhibitor package formulated with a proprietary stabilization system to improve the durability of its carboxylate salt base and extend its range of compatibility with both conventional inorganic salts and OAT-type antifreezes.
Virgin antifreeze made with A-90800 provides a service life up to 150,000 miles or 3000 hours. A-90800 contains no phosphates, borates, nitrates, or silicates. This extended life additive package possesses multiple complex carboxylic acid derivatives along with nitrite to protect all six standard metal alloys (brass, copper, steel, solder, cast iron and aluminum).
These low foaming carboxylates and other proprietary ingredients not only provide broad-range metal protection but also guard the cooling system against corrosion and cavitation-erosion. In addition it contains additives to minimize hot surface scaling while also preventing heat transfer surface fouling due to minor oil leakage. This additives system can be used effectively with either propylene or ethylene glycols.
| Property | Value |
|---|---|
| Specific Gravity @ 60°F | 1.140 |
| pH | 9.9 |
| Appearance | Hazy, light amber color |
| Property | Value | ASTM D-3306 |
|---|---|---|
| Specific Gravity @ 60°F | 1.15 | |
| pH | 9 | |
| Reserve Alkalinity | 2.2 | |
| Freeze Point | -34 | |
| Nitrite Content | 2400 |
Blending Instructions:
To make antifreeze concentrate (97.8% glycol, 2.2% additives), first charge the desired quantity of glycol to the blending tank. The glycol should be at a temperature of 45ºF or higher and should have an initial pH of 7.0-9.5. Maintain this temperature of 45ºF or higher throughout the blending procedure.
Based on the quantity of glycol being treated, add 2.2% by volume of A-90800 while agitating or circulating glycol (Two 55 gallon drums per 5,000 gallons of glycol). Continue to agitate for 15-30 minutes after entire Additive Package content has been added. Store the concentrated Add Pak at a temperature above 40ºF.
| ASTM D 3306 | GM 6043M | GM 1825M | John Deere H-5 |
| Ford New Holland 9-86 | GM 1899M | ASTM D 4985 | SAE J814C |
| Mercedes 7700 | Mack Truck 014GS17004 | Freightliner 48-22880 | Audi |
| ASTM D 5345 | SAE J1034 | Subaru | Ford ESE-M97B44-A |
| White (GMC Div. Of Volvo) | ATA RP 302A | ASTM D 4656 | SAE J1038 |
| Nissan | Detroit Diesel 7SE298 | Case Corp. MS1710 | John Deere 8650-5 |
| ASTM D 6210 | SAE J1941 | Navistar B1 (B6-008GO) | BMW |
| Waukesha 4-19470 | Ford ESE-M97B18-C | Caterpillar EC-1 | Chrysler MS-7170 |
| Cummins 90T8-4 | Cummins 3666132 | ||
For further information please contact your local affiliate or representative.