Infineum S810 is an ashless water-cooled two cycle additive package designed to meet the NMMA TC-W3 performance specification when blended with solvent and heavy neutral oils.
Infineum S810 has exceeded all of the TC-W3 requirements, including the Mercury 15 Hp test.
| Performance Level | Vol % | Mass % |
|---|---|---|
| NMMA TC-W3 (Recertified) | 20.1 | 20.3 to 21.1 depending on solvent |
| Property | Typical (b) | Method (a) |
|---|---|---|
| Density at 60 Deg.F. lb/USGAL | 7.59 | ASTM D 4052 |
| Density at 15 Deg. C. kg/m3 | 913 | ASTM D 4052 |
| Flash Point (PM), Deg. C/Deg. F | 160/320 | ASTM D 93 |
| Specific Gravity @ 60 Deg. F | 0.912 | ASTM D 4052 |
| Viscosity at 40°C, cSt | 5590 | ASTM D 445 |
| Viscosity at 100°C, cSt | 195 | ASTM D 445 |
| Nitrogen Content | 1.24 | ASTM D 5291 |
| Coefficient of Thermal Expansion, vol/vol, Deg. C/ Deg. F | 0.00076/0.00042 | AM-S 020.20 |
(a) Methods used by Infineum manufacturing plants, (b) Not a specification
Infineum S810 can be blended using conventional equipment for blending finished fluids.
Storage Temperature (maximum) 55°C/131°F
Transfering Temperature (maximum) 75°C/165°F
Blending Temperature (recommended) 60°C/140°F.
At 60 deg C (140 deg F), the Kinematic Viscosity is 1600 cSt.
Tanks should have adequate agitation to avoid excessive skin temperatures. Dry conditions are essential since water may promote decomposition of the additive.
For further information please contact your local Infineum affiliate or representative.