At the recommended treat rate of 8.4 mass % (7.9 volume %) using appropriate Group II base stock, Infineum T4580 produces an automatic transmission fluid suitable for use in most GM and Ford applications, all Allison C4 applications, and any other application calling for use of DIIIH/M quality ATF.
Infineum T4580 is based on a performance package that was licensed for GM and Ford DIIIH/M applications, along with Allison C4 applications.
| Performance Level | Mass % |
|---|---|
| DIIIH/M | 8.4 |
| ALLISON C4 |
| Property | Value (a) | Unit | Method (b) |
|---|---|---|---|
| Density at 15°C | 912 | kg/m³ | ASTM D 4052 |
| Density at 60°F | 7.61 | lb/gal | ASTM D 4052 |
| Flash Point (PM) | 170 | °C | ASTM D 93B |
| Viscosity at 100°C | 270 | cSt | ASTM D 445 |
| Boron Content | 0.07 | mass % | ASTM D 5185 |
| Nitrogen Content | 0.98 | mass % | ASTM D 5291 |
| Phosphorus Content | 0.18 | mass % | ASTM D 4927 |
(a) Not a specification, (b) Methods typically used by Infineum manufacturing plants
Follow precautions normally taken for handling lube oil stocks. This product is temperature sensitive. Do not heat over the maximum loading / unloading temperature to avoid possible release of extremely odorous alkyl mercaptans and/or toxic hydrogen sulfide.
Localized high temperatures should be avoided during heating, especially when product cannot be agitated. Electrical, steam or hot oil heating systems with a self limiting maximum temperature not exceeding 120 Deg.C/250 Deg.F (e.g. low pressure steam at 2 bar(g) or 30 psig) are recommended.
Loading/ Unloading temperature: 55 °C ( ~1400 cSt) to 70°C (~750 cSt)
Max Storage Temp : 60 °C ( 140 F )
For detailed data please refer to the relevant MSDS
For further information please contact your local Infineum affiliate or representative.