N 9110 is a Multi-Functional Tractor Hydraulic Fluid Additive designed to satisfy the performance requirements of John Deere, J.I. Case, Massey-Ferguson, White Farm Equipment, Allis Chalmers, Ford and International Harvester. In addition, N 9110 meets or exceeds most tractor fluid OEM requirements current and obsolescent. Contact a representative for information on all applicable industry claims and base oil suitability.
VI Improver: N9110 may be used with non-dispersant OCP viscosity modifiers having very high shear stability.
Dosage: 6.0 wt% (4.9 vol% in a 28°API base oil) is the recommended treat rate.
| Properties | Physical | Method* |
|---|---|---|
| Specific Gravity @ 15.6°C (60°F) | 1.048 | ASTM D-1299 |
| Viscosity @ 40°C, cSt | 108 | ASTM D-445 |
| Viscosity @ 100°C, cSt | 13.8 | ASTM D-445 |
| Flash (P-MCC), min, °C (°F) | 85 (185) | ASTM D-93 |
| TBN, mg KOH/g | 150 | ASTM D-2896 |
| Property | Value | Method |
|---|---|---|
| Zinc, wt% | 2.50 | ASTM D-5185 |
| Calcium, wt% | 5.69 | ASTM D-5185 |
| Nitrogen, wt% | 0.086 | ASTM D-5291 |
| Phosphorus, wt% | 2.24 | ASTM D-5185 |
*The above characteristics are not specifications and are provided to indicate the typical values measured on the product.
When handling this product a MAXIMUM temperature of 40°C should be observed for storage, unloading and blending. However, it is strongly recommended that for long term storage the temperature should not exceed 25°C.